Serial Baud rate

About › Forums › Forum › Serial Baud rate

This topic contains 1 reply, has 2 voices, and was last updated by  soundanalogous 1 year, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 15, 2012 at 11:02 AM #634

    duttydea
    Participant

    Hi Everyone.

    I’m really impressed with breakout,

    What is the Serial Minimum baud-rate that cam be used with Breakout?

    Im hoping to use a 2.4ghz (Fixed 9600 baud-rate)  RF modem!

    Would this work?

    Thanks in advance

    DDea

    April 15, 2012 at 12:46 PM #636

    soundanalogous
    Member

    The baud rate is fixed at 57600. This is the baud rate used by Firmata. If you want to use a wireless connection I recommend using an Arduino Fio board with an XBee radio (note that you must use the Series 1 radios). You can run these at 57600 baud.

    I have posted an Arduino Fio setup guide and a tool to configure the radios here:
    Fio Setup Instructions
    XBee Configuration Tool

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.